Finally the last DivIDE parts arrived!

I had to contact the company for that, and they sent me another package because the first one never arrived; that second package arrived in a week!

Anyway, I soldered one DivIDE, programmed the rom, but...
My programmer does not support Atmel 22V10 gal's !!@!$!

So... I just ordered another programmer that is able to program those, but that will take another two weeks.. :(

Sorry for everyone who is waiting!!!

As Velesoft's replies to my previous weblog entry contain corrupted characters (that's not his fault), I promised him to publice the info in a different way ;)

Velesoft added this info:

This is the correct picture of solder side on DivIDE 57c (resistor net and C8 is unused):
http://velesoft.speccy.cz/zx/divide/div ... _side).png

A-GAL and M'-GAL can be used from original ZIP file:
http://velesoft.speccy.cz/zx/divide/divIDE_57c.zip

But R-GAL files in this ZIP is rare. From year 2007 are used in DivIDE new R"GAL (same as original but with additional true allram mode):
http://velesoft.speccy.cz/zx/divide/r&# ... ivide).zip
(with old R-GAL is impossible use BS-DOS and other new software)

I put two auctions for the K-Mouse interface on eBay this morning:

K-Mouse without mouse

K-Mouse with mouse

The prices may seem different, but that is because eBay UK didn't let me put more than 5 euro postage costs for UK people, so I had to lower postage costs and made the price of the K-Mouse a bit higher.

Again, you can still order from me directly!
Use the 'Contact Me' form on the right for that!

I just ordered the parts for the next project: a batch of DivIDE interfaces.

I expect to receive all parts within two weeks.
The soldering should be easy, and the same counts for the programming of the ic's.

Be sure to visit www.benophetinternet.nl/hobby for updates!